EKORAS Power Inverter 5500W/3.5KW Solar Inverter AC 220V DC 48VDC MPPT 100A 500VDC PV Input Pure Sine Wave Hybrid Inverter

Price: $1,945.64
(as of Oct 18,2023 10:04:16 UTC – Details)

NOTE:We have a energy storage battery that can customize 1 degree-10 degrees. To avoid insufficient battery capacity or excessive waste of power generation. The battery capacity is based on the specific requirements of load and application scenarios. You can contact us to get technical support.
Featurs:
Pure sine wave inverter
6.0 KW MPPT
Solar charger of the maximum charging current is 100A
120-500V wide PV input
Lithium battery
Can work no battery
Generate power from PV directly to supply load, even without battery
PV to AC efficiency is much higher
please know if the inverter does not connect battery, the PV voltage must be over 200VDC .
The dust kit needs to be purchased additionally
Note:
Description of the hybrid inverter. off Grid inverter + solar controller combination. The AC output of the inverter cannot be connected to the household grid. the AC output can only power loads (e.g. air conditioning, rice cooker. LED…) The AC input can be connected to the mains to charge the batteries. the PV input is connected to the solar panel to charge the batteries.
This is a wide voltage hybrid inverter.
The Minimum Of MPPT Operating Voltage Should Be 150V To Make Sure That The Device Start Working,And 360V Is The Best.If You Have Any Problem,Please Contract US in Time,Thanks:)
This product supports lithium batteries and needs to be customized by the customer.
The hybrid inverter is connected to the power source. A circuit breaker must be used. (PV, AC, Battery)
Note2:
Inverter connection sequence.
1: The battery must be connected to the inverter first. Batteries and inverters use air switches.
2: After connecting the battery, you can connect to the mains or solar panel.
Model
VM-3500W
VM-5500W
Rated Power
3500VA/3500W
5500VA/5500W
Input
Voltage
230VAC
Selectable Voltage Range
170-280VAC(For Personal Computers)
90-280VAC(For Home Appl
The chip controls overvoltage, overload, overcurrent, undervoltage, overtemperature and short circuit protection, when the inverter is in protection When it is in the state, it will turn on a short beep and power off, the screen will flicker, and it will automatically restart after correcting the error.
The LCD screen can display real-time usage status (such as working temperature, battery power, output voltage, equipment performance, protection functions, etc.) to facilitate monitoring of usage.
just connect the inverter to the battery to power your equipment; it is very suitable for trucks,RVs,camping,boats or emergency situations where the power is cut off during a storm or hurricane.
Simply connect this 12 volt converter to a 12 volt battery and then connect it to your electronics or appliances. Standard mounting ports provides easy installation for home and vehicle users. Every inverter is tested before shipment.