DIANXIAOMI UL1741 12KW 48V Solar Hybrid Inverter, Output 120/240V Split Phase Pure Sine Wave, Low Frequency Inverter, DC 48V AC Input 240V AC, 2x60A MPPT Solar Charger Controller-12000W

Price: $2,697.00
(as of Oct 18,2023 17:14:27 UTC – Details)

Product Description

GS Series Inverter

Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system. The most common use for this inverter is emergency backup power or off-grid systems for residences, businesses and remote power needs.

Important Safety Warning

Before using the unit, read all instructions and cautionary markings on: (1) The unit (2) the batteries (3) all appropriate sections of the manual.

This Inverter Support 2x60A MPPT Solar Charger Controller

The maximum solar charging current :2x60A=120A

The maximum charging current : 200A (2x60A MPPT+80A AC Charger=200A)

1 x 60A MPPT Solar Charger Controller, The Max Input Power is 3500W. 2 x 60A MPPT Solar Charger Controller, The Max Input Power is 7000W.

Rated charge current:60A

Rated Battery voltage:48VDC

Input voltage range:50-145Vdc

Max. PV open circuit array voltage:150Vdc

Max. recommended input power (W) :3500W

You can disable the inbuilt solar controller, connect with external solar controller, or use for other systems

it is not limited for solar system

Appliances in a home operate on AC current. Solar array generates DC current. A solar charge controller regulates DC power from solar arrays to charge the batteries. Batteries function as the “bank” where excess renewable energy is deposited and then later withdrawn when needed. An inverter is required to convert DC current from the renewable source to usable AC current for appliance and other home powering needs.

Because there is variability in the renewable source, a generator is often incorporated into the system to charge batteries when needed. As the output of most generators is AC, an AC charger is needed to convert AC to DC for the purpose of charging the batteries. Essentially, off-grid solar inverter will regulate PV generation, convert power from DC to AC for consumption and AC to DC for charging.

Inverter *1 User Manual *1 Unit Weight: 106lbs/48kg Size: L x W x H: 24.7 x 16.4 x 8.05 inch / 627.5*416.5*204.5mm

12KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V

Automatic Generator Starting (AGS)when low battery voltage or no utility.Support 2x60A MPPT Solar Charger Controller.5 stages adjustable AC charging current. AC charging also can be closed.1 x 60A MPPT Solar Charger Controller, The Max Input Power is 3500W. 2 x 60A MPPT Solar Charger Controller, The Max Input Power is 7000W.8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）.5 stages adjustable AC charging current. AC charging also can be closed.Powerful Charge Rate Up to 200Amp, Selectable From 0%-100%.Built-in transfer switch and battery charge, backup or off grid power solutions.AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration.4-step Intelligent Battery Charging, PFC for Charger.Smart fan adjustment(The fan automatically adjusts the wind speed according to the ambient temperature).Remote control line can be connected (without accessories, optional accessories if needed).

GS Series hybrid Inverter is designed to serve as a backup power supply for AC loads.

The input power of GS Series hybrid Inverter comes from PV system and AC grid which not only supply power to AC loads but also charge the battery bank when the power from AC grid or AC generator is present (also known as Line Mode).

In the event of AC grid (or AC generator) outage, the AC loads can be alternatively powered by PV system (if the illumination is sufficient) and battery bank.

Earthing(ABYC standard)

Inverter mode: the neutral and the earth joined

Line mode: the neutral and the earth separated

Use a Relay to realize the function.

Smart fan Adjustment

The fan automatically adjusts the wind speed according to the ambient temperature

Low Frequency Split Phase

48 VDC input, 240V input VAC to 120/240V AC split phase output This low frequency unit is a combination of an DC to AC power inverter, battery charger and AC auto-transfer switch into one complete system

Inverter Output Specifications

Continuous Output Power: 12000 Watts

Surge Rating: 36000 Watts

Output Wave Form: Pure Sine Wave

Output Voltage: 120/240Vac

Nominal Efficiency: 90% (Peak)

Line Mode Efficiency: >99%

Output Frequency: 50Hz / 60Hz ± 0.3Hz

Typical Transfer Time: 10ms

Inverter Input Specifications

Nominal DC Input Voltage: 48.0Vdc

Low Battery Alarm: 42.0Vdc-44.0Vdc

Low battery Trip: 40.0Vdc-42.0Vdc

High Voltage Shut-down: 64.0Vdc

Low battery Shut-down Recovery:44.0 ± 0.8Vdc

High battery Shut-down Recovery:62.0 ± 0.8Vdc

Idle Consumption: 230 Watts

Nominal Input Frequency:50Hz / 60Hz (Auto detection)

Charger Specifications

Output Voltage: Depends on battery type

Battery Initial Voltage for Start Up: 40-62.8V

Nominal Charge Current:

48VDC model: Max 50A

Over Charge Protection:

Bat. V ≥61.0Vdc, Fault, Buzzer alarm for 48Vdc

🌞【GS INVERTER MEETS UL1741 STANDARD ETL CERTIFICATION】 The GS series solar inverter has passed the ETL certification that meets UL1741 standard, which will be your best choice and you can buy it with confidence. You can use it with more peace of mind and let it help you save more money on your electricity bill, while allowing you to be prepared for the next power outage.
🌞【CHARGING/AC OUTPUT MODE】 Inverter has working mode: three modes are available: AC priority, DC priority, intelligent mode, charging current can be set by LCD screen. It is not only suitable for common appliances such as TV and computer, lights and fans, but also for inductive loads such as refrigerators, air conditioners, motors, washing machines, pump compressors, laser printers, etc.
🌞【BUILT-IN MPPT SOLAR CONTROLLER】Intelligently remote control, automatic generator start (AGS) when battery voltage is low or no utility power, support 2 MPPT solar charge controllers of 60A. Maximum charging current 200A, selectable from 0%-100%, intelligent fan adjustment (fan automatically adjusts wind speed according to ambient temperature). Accepts two strings of 60A PV (up to 3500w) input from two solar arrays or 120A (up to 2X3500w) input from one large PV array in parallel.
🌞【GS SERIES SOLAR INVERTER】 Pure sine wave inverter is a complete system combining inverter, AC charger, Mppt solar charger and automatic transfer switch. Advanced DSP digital control technology has been adopted to achieve higher power density integration and miniaturization. The most common use of this inverter is for emergency backup power or off-grid systems for residential, commercial and remote power needs.
🌞【MULTIPLE PROTECTION】 Multiple protection against overload, short circuit, over temperature, undervoltage and overvoltage. Input and output are completely isolated from the low-frequency topology, and the AC output is synchronized in phase and frequency with the AC input source to protect the inverter and load from seamless transmission. The transformer can handle higher power peaks for longer durations when driving inductive loads such as motors, pumps, compressors, and air conditioners.
🌞【Fastest Delivery& Best Service】:As the professional solar inverter seller we provide the fastest speed and safety delivery to your hands. We offer the most professional and best after-sales service, If you have any questions, please feel free to contact us. We will reply and solve the issue quickly to bring you with a pleasant & satisfied shopping experience.